25w Changeable Emitting Color Plastic PAR56 LED Pool Light with RGB remote control
Specification
| Model No. | MS-P56H-RGB-1825 |
| Input Voltage | 12VAC/DC |
| LED Q'ty | 18pcs |
| LED Type | high-power(3-in-1,3w/pc) |
| Beam-angle | 25°/30°/45°/60° |
| Rated Power | Red | - |
| Green | - |
| Blue | - |
| White | - |
| RGB | 25W |
| Material | plastic & transparent PC cover |
| Light Source | RGB |
| Control Mode | RGB remote control |
| Luminous Flux (Lm) | Red | - |
| Green | - |
| Blue | - |
| White | - |
| RGB | 810-990Lm |
| Demension | ￠177mmxH105mm |
| Base Type | screw terminal |
| IP Rating | IP68 |
| Warranty | 2-year |
Features
1. Plastic housing with PC cover
2. Synchronously remote control
3. IP68
4. 2-year warranty
Advantages
1. Plastic housing made by Maysee's private tool
2. With high precision assembly to go for IP68
3. RGB color-changing upon synchronous remote control
4. Available for SMD led, high-power led & COB led as the light-source combination
5. Embedded installation method in PAR56 size in accord with international pool standard
6. Over-current protection design
Installation
For PAR56 swimming pool light, the embedded installation method is widely put to use and Maysee would
like to have your kind attention to the following items:
I. Normally the PAR56 LED Light is to be mounted 30-40cm below the water level;
II. Make the right light slot in accord with the fixture size of PAR56 pool light.
III. Have the outside fixture mounted inside the concrete wall.
IV. With correct cable connection, controller and amplifier fixing, then have the pool light embedded in the
light slot of the swimming pool.
V. Ensure that the outer face of mounting ring is flush with the finished pebble surface;
VI. Amplifier/controller is supposed to be installed in an easy access to maintenance and after-service.
Application
1. swimming pool and pond
2. waterfall and fountain
3. fishing dock and beach
4. aquarium
Product Tags:
|
|
25w Changeable Emitting Color Plastic PAR56 LED Pool Light For Aquarium Images
|
